This comprehensive second stage service includes the following :
- With your mouthpieces we check for holes, perishing and that mouthpiece lugs aren’t torn or chewed off
- 2nd stage regulators purge buttons are inspected for signs of disintegration from UV destabilisation.
- 2nd stage bodies get inspected for cracks.
- All adjustment knobs and levers are fully functional
- We listen for rattling levers.
- 2nd stage diaphragms are inspected for holes and elasticity.
- They are carefully disassemble it using high quality manufactures recommended tools
- We look for any damage that may effect the performance of your 2nd stage regulator.
- We remove all of the old silicon grease with microfibre cloths.
- All of your metal parts are put into our special non-corrosive solution and ultrasonically cleaned.
- Parts are then placed in hot water to remove any cleaning solution.
- Plastic parts are hand washed only
- Parts are dried off with a blow gun.
- We then crack open your manufacturers service kit, check the integrity of all there O ring.
- All O rings are greased up ready for reassembly.
- The 2nd stage is then reassembled and correctly torqued up to your manufacturers specifications.
- The cracking effort is set.
- We connect it up to your quick set machine and dry dive your second stage for 30 minutes to ensure all seats are bedded in
and that it is preforming as required. - Fine tuning and final adjustments are made while verifying the correct functionally
- Finally cable ties, mouth pieces are replaced along with any pins and stickers
- Write up report on your gear so you know what’s going on.
