When your full regulator set is serviced with us, it will be completely disassembled. This includes the first stage, primary second stage, alternate second stage, low pressure inflator hose and pressure gauge. Each part will be fully cleaned, degreased and descaled using our state of the art ultrasonic cleaner, specifically made to deep clean your dive gear without stripping the material. All of your required o’rings and parts will be changed out at every servicing appointment as required by your manufacturers maintenance schedule, so when you jump back in the water you will be confident that everything is in top condition.
Every millimetre of your gear is fully inspected for defects and wear so we can inform you on any potential future issues. Once everything has been stripped, cleaned and replaced, we will reassemble your regulators using the specialised tools and appropriate lubrication for your specific kit.
IMPORTANT NOTICE – Most manufacturers recommend you service your SCUBA life support equipment annually. If your regulator is older than 15 years OR it has not been serviced in the last 3 years, additional labour time and fees may be required. You may be asked to show a service report. Please see terms and conditions.
*Please note we also offer variations of a full service including the following :
- Full Scuba Regulator Service
- First Stage Regulator Service
- Second Stage Regulator Service
- First & Second Stage Regulator Combo Service
- Dive Gear Performance & Safety Check
Click the links above to read more and book your service!
It definitely needs some love and an annual tune up too! When you bring your BCD to Safety Stop, each part is fully inspected for defects and wear, then repaired or replaced as necessary. Bladders and inflator hoses are checked for leaks and o’rings are changed. All o’rings and threads will receive appropriate lubrication when we reassemble your BCD. It will receive a final test before you get it back to ensure all moving parts are in good working order and your BCD is holding air as it was intended. When you receive your BCD back from Safety Stop, it will almost feel like new again!
IMPORTANT NOTICE – Most manufacturers recommend annual SCUBA life support equipment servicing. If your BCD is older than 15 years OR it has not been serviced in the last 3 years ), additional time and fees may be required. You may be asked to show a service report. Please see terms and conditions.
BCD Services Offered :
BCD with air source Service
Click the links above to read more and book your service!
Computers
Dive computers are an essential piece of safety equipment. It is important to be certain that yours is reliable and provides you with the most safe and accurate information.
Most manufacturers recommend servicing your dive computer every one to two years. By following this recommendation you can avoid any issues that may arise and put a damper on your dive trip. That’s where we come in! Your service with Safety Stop will include a battery change, pressure test to ensure its watertight integrity, a depth check to be sure the reading is accurate and it will be returned to you with all dates and times reset appropriately.
IMPORTANT NOTICE: If your computer is older than 5 years, there is a possibility that the computer may malfunction (or simply not turn on) after a battery change. We are not liable for this.
Some simple facts
700
Services Completed
950
Certified Students
9
Countries Dived
17
Years Diving